Formax 7200 Series - Manual (Page 43)

42
8.2 Loading the versatile feeder hopper
1. Slacken the black knob
next to the side guides
(arrowed) and move the
guides to give 1-1.5mm
clearance each side of
the enclosure. Tighten
the knob.
2. Slacken the black
knob under the backrest
(arrowed) and move it
forwards to support the
enclosures as shown.
Ensure the enclosures are
directed down into the
feed rollers. Tighten the
knob.
Adjusting the separator
The separator prevents more than one enclosure being fed at a time.
To adjust the separator, turn the knob on
the back of the feed hopper.
Clockwise decreases the gap,
anti-clockwise increases it.
To set the separator gap, empty the
hopper, then slide an enclosure into the
gap and turn the knob until the separator
will just grip the enclosure as you
withdraw it.
To help you establish an initial setting,
there is a setting gauge on the separator
unit, visible after opening the feeder side
cover. See following page.