Fronius Power Control Card User Manual

Page 38

Advertising
background image

36

Functional princi-
ple

Scope of supply

(1)

1 x Fronius Power Control Card

(2)

1 x 5-pin plug for connection to the
ripple control signal receiver

(3)

2 x Fronius Solar Net terminating
plugs

not shown:

1 x operating instructions
1 x cardboard packaging (only pro-
vided when retrofitting Fronius
Power Control Cards)

If the Fronius Power Control Card is
integrated in the inverter, the other
components are supplied in a plas-
tic bag.

Prerequisites for
operation of the
Fronius Power
Control Card

-

The Fronius Power Control Card contains all the functionality of the Fronius Com
Card. Having a Fronius Power Control Card and a Fronius Com Card installed in the
same inverter at the same time is not permitted, and is not necessary.

1230 W

Wechselrichter 1

Power
Control Card

Rundsteuer-
Empfänger

1230 W

Wechselrichter 2

Com Card

1230 W

Wechselrichter 3

Com Card

EVU

(1)

(2)

(3)

WARNING! Risk of injury and damage from an electric shock or spark-over. A
Fronius Power Control Card and a Fronius Com Card must never be used in a
device at the same time.

CAUTION! There is a risk of damage from the equipotential bonding of different
DATCOM rings. Only one Fronius Power Control Card may be connected directly
to a ripple control signal receiver.

Advertising