Fronius Power Control Card - Manual (Page 47)

45
EN
Installing the Fronius Power Control Card
Installing the Fro-
nius Power Con-
trol Card
If a Fronius Com Card is already installed in an inverter:
Remove the Fronius Com Card from the inverter before installing the Fronius Power
Control Card
Insert the Fronius Power Control Card into the inverter and fix into place as described
in the "Inserting option cards" section in the inverter operating instructions
WARNING! Risk of injury and damage from an electric shock or spark-over. A
Fronius Power Control Card and a Fronius Com Card must never be used in a
device at the same time.
WARNING! Risk of injury and damage from an electric shock or spark-over. Al-
ways insert the Fronius Power Control Card in the slot furthest to the right.
NOTE! When routing the cables, ensure that they do not come into contact with
any electronic parts or edges. Do not bend the cables.
1
2