Fronius Power Control Card - Manual (Page 52)

50
Technical data
Fronius Power
Control Card
1)
Digital inputs D1-D4 to connect floating switch contacts. Power is supplied by pull-up re-
sistors on the Fronius Power Control Card with an output current of max. 3 mA per channel.
CE mark Proper use of the Fronius Power Control Card ensures compliance with all the requisite
and relevant standards and guidelines that form part of the relevant EU Directive.
More detailed information can be found in the appendix or in the "Technical Data" chapter
in the inverter operating instructions.
Compatibility list The following table lists the devices and option cards that can be used at the same time as
the Fronius Power Control Card.
Supply voltage 230 V AC
Supply voltage tolerance +10% / -15%
Energy consumption 1.6 W
"IN" and "OUT" interfaces RS422 / RJ45 socket
Digital input 1)
(interface to ripple control signal receiver)
-0.3 V to +5.5 V
Dimensions (l x w x h) approx. 140 x 100 x 30 mm
Weight approx. 140 g
Generic term Item designation Item no.
Com Card
1)
Fronius Com Card 4,240,001(Z)
Datalogger 2)
Fronius Datalogger pro Card 4,240,002(Z)
Fronius Datalogger pro Box 4,240,102
Fronius Datalogger easy Card 4,240,003(Z)
Fronius Datalogger easy Box 4,240,103
Fronius Datalogger Web 4,240,123
Fronius Datalogger & Interface Box 4,240,105
Sensor Card/Box
3)
Fronius Sensor Card 4,240,004(Z)
Fronius Sensor Box 4,240,104
Public Display 3)
Fronius Public Display Box 4,240,106
Fronius Public Display Card 4,240,006(Z)
Fronius Public Display 4,240,306
Personal Display
Fronius Personal Display DL 4,240,132
Fronius Personal Display DL Box 2) 4,240,136
Fronius Personal Display Card 4,240,007(Z)
Interface Card/Box
Fronius Interface Card 4,240,009(Z)
Fronius Interface Box 4,240,109
IFC easy Fronius Interface Card easy 4,240,013(Z)
Signal Card Fronius Signal Card 4,240,012(Z)