Fronius Acctiva Professional Flash - Manual (Page 69)

67
EN
Setup menu
General remarks The setup menu gives you the ability to configure the device’s basic settings according to
your own requirements. You can also store frequently used charge settings.
Setup menu -
overview
WARNING! Operating the equipment incorrectly can cause serious damage. The
functions described must only be carried out by trained and qualified personnel.
In addition to the safety rules in these operating instructions, the safety rules of
the battery and vehicle manufacturers must also be followed.
USER U/I
Setting of following parameters:
-
maximum charging current (standard charging)
- main charging voltage (standard charging)
- conservation charging voltage (standard charging)
- safety cut-out (standard charging)
- maximum charging current (user charging)
- main charging voltage (user charging)
- conservation charging voltage (user charging)
- safety cut-out (user charging)
- maximum external power supply
- external power supply voltage
- refresh charging voltage
- refresh charging period
- exit USER U/I menu
PREFERRED SETTINGS
Saves the frequently used operating modes you wish to
keep once the charger leads are removed or the charger
is discon-nected from the mains
CHARGING CABLE
Settings defining the length and cross-section of the
charging cable
FACTORY SETTING
Resets device to factory setting
DELAY TIME
Sets the charging start delay time. Charging starts after a
predefined period.
DEVICE VERSION
For querying the current hardware and firmware version
DEVICE HISTORY
Checking operating hours counter
EXIT SETUP
Exits the setup menu