Fronius Selectiva - Manual (Page 15)

13
EN
Control elements and connections
General
Control panel
NOTE! As a result of firmware updates, you may find that there are functions
available on your device that are not described in these operating instructions or
vice versa. Certain illustrations may also differ slightly from the actual controls on
your device, but these controls function in exactly the same way.
WARNING! Operating the equipment incorrectly can cause serious injury and
damage. Do not use the functions described here until you have thoroughly read
and understood the following documents:
-
these operating instructions
- all the operating instructions for the system components, especially the safe-
ty rules
NOTE! The control panel (LED version) is explained below.
Standard version Switching version
No. Function - Standard version No. Function - Switching version
(1) State of charge indicator 25% (1) State of charge indicator 25%
(2) State of charge indicator 50% (2) State of charge indicator 50%
(3) State of charge indicator 75% (3) State of charge indicator 75%
(4) State of charge indicator 100% (4) State of charge indicator 100%
(5) Ready indicator (5) Ready indicator, charging voltage
12 V
(6) - (6) Ready indicator, charging voltage
24 V
(1)
(2)
(3)
(4)
(7)
(5)
(6)
(8)