Mounting – GAI-Tronics 7085-005-UL, 7085-005-EX SmartSeries Multi-Party Hazardous Area Handset/Speaker Amplifier Enclosure w/ RTU Control User Manual
Page 5
Pub. 42004-697L2B
Model 7085-005-UL/EX SmartSeries Multi-Party Haz. Area Amp. Enclosure with RTU
Page
5 of 15
\\s_eng\gtcproddocs\standard ioms - current release\42004 instr. manuals\42004-697l2b.doc
11/07
Mounting
N
OTE
: The mounting surface must be able to support the weight of the aluminum enclosure. See the
Specification section for the weights and dimensions of the unit.
The enclosure comes standard with mounting feet capable of being rotated 90º. This allows for top and
bottom mounting feet or side-to-side mounting feet. The enclosure ships with the mounting feet in the top-
to-bottom configuration, for ease of installation. Refer to Figure 4 for both sets of dimensions.
Figure 4. Model 7085-005-UL/EX Enclosure Mounting Details
The enclosure must be securely fastened with 1/2-inch diameter steel mounting bolts located on all four
mounting feet. Stainless steel hardware is recommended in outdoor applications.
N
OTE
: Refer to the Killark Installation, Operation, and Maintenance Data Sheet enclosed with the unit for
additional information.