Gasboy ATC M05819K00X Kits - Manual (Page 22)

Installing the Commercial Atlas (9800K) ATC Kits
Page 22 MDE-4431C Gasboy ATC M05819K00X Kits Installation Manual · February 2013
12 At the CPU PCA (see Figure 15 ), disconnect the Connector connected to the Pulser 1,
Handles, and Pulser 2 jacks.
Figure 15: CPU PCB Assembly
Pulser 1 and
Handles Jacks
Pulser 2 Jack
LCD Display
Jack
LCD Display
Jack
Pulser 1 and
Handles Jacks
Pulser 2 Jack
(i)
(ii)
CPU PCB Assembly with Connections
CPU PCB Assembly without Connections
13 Locate the Circuit Board Assembly (461A2) provided in the kit (for identification, see

Figure 1 on page 5 ). Connect the assembly to the jacks labeled Pulser 1, Handles, and Pulser 2
at the CPU PCA.
14 Reconnect the Connector removed in step 8 on page 20 to the Circuit Board Assembly [461A2
(directly above the Pulser 1, Handles, and Pulser 2 Connectors)].