Step 5, Step 6 – Gasboy 9800A Atlas User Manual
Page 6
Installing the Kit
Atlas
™
and TopKAT
™
are trademarks of Gasboy International. Gasboy
®
is a registered trademark of Gilbarco Inc. Phillips
®
is a registered
trademark of The Phillips Screw Co.
© 2008 GASBOY
7300 West Friendly Avenue · Post Office Box 22087
Greensboro, North Carolina 27420
Phone 1-800-444-5529 ·
· Printed in the U.S.A.
MDE-4733 TopKAT™ Upgrade Kit For Atlas™ 9800A · March 2008
5
Use the four 1/4-20 Bolts, Lock Washers and Flat Washers to install the Support Base from
inside the unit.
6
Attach the Gasket (M07800B001) to the top surface of the Support Base, aligning the 8 MTG
holes and adhesive side to the Support Base.
7
Install the cables and the TopKAT to the unit. Refer to MDE-4319 TopKAT Installation
Manual for instructions.
Note: Four 1/4-20 bolts, Lock washers and Flat washers are provided to install the TopKAT.