Gasboy 8700Q Series - Manual (Page 5)

07/15/03 1-1
Section 1
INTRODUCTION
PURPOSE
The GASBOY Series 8700Q Pumps and Dispensers Installation/Operation Manual is provided to
assist the installer in installing and operating the unit. This manual should be supplied to the
electrician prior to the installation of conduit and wiring to ensure the Series 8700Q dispensing unit
is installed properly. Faulty installations are the major cause of unit malfunctions. The unit must
be installed and operated as described in this manual to ensure the reliability and proper operation
of the Series 8700Q dispensing unit. In addition to installation information, this manual contains
warnings, safeguards and procedures on the use and care of the Series 8700Q pumps and
remote dispensers. Be sure to leave this manual with the pump/dispenser owner after the
installation is complete.
☎
Customers and installers having any questions pertaining to the installation should
contact their GASBOY distributor.
GENERAL DESCRIPTION
The GASBOY Series 8700Q dispensing units are UL-listed and are available in a self-contained
(suction pump) package or in a remote-controlled (dispenser) package. Both packages offer a
variety of models which are available as single hose outlets or dual hose outlets (with single or
dual product capability). The self-contained models are available in standard speed, up to 15
GPM/56 LPM; in high speed or up to 22 GPM/83 LPM. The rate of delivery for the remote-
controlled packages will vary according to the size of the submersible pump. The delivery rate of
both packages will also vary depending upon installation conditions and added accessories.
The Series 8700Q offers the following features:
At a glance:
Suction Pumps Remote Dispensers Features
Standard
Speed
Models 8752Q
8752QTW1
8752QTW2 8752QX
8752QXTW1
8752QXTW2 Inlet: 1-1/2" NPT
Discharge: 3/4" NPT (female threads)
Motor: 3/4 HP continuous duty
Valves (dispenser only): 1"
High
Speed
Models 8753Q
8753QTW2
8753QTW1M 8753QX
8753QXTW1
8753QXTW2 Inlet: 1-1/2" NPT
Discharge: 1" NPT (female threads)
Motor: 3/4 HP continuous duty
Valves (when used): 1"