2 - t-chek cards, Prompts, Driver id or enter prompt – Gasboy FleetCor Dual Special Card Handler User Manual
Page 9: Refer 1=yes 2=no prompt, Odometer prompt, Unit # prompt, Transaction format, 2 – t-chek cards

MDE-4310B CFN Series FleetCor Dual Network Special Card Handler V1.0.1 · April 2007
Page 5
Prompts
T-Chek Cards
2 – T-Chek Cards
Prompts
Driver ID or ENTER Prompt
• Always prompted for.
• If no driver ID is required, press ENTER to proceed to the next prompt.
Refer 1=YES 2=NO Prompt
• Always prompted for.
• A valid response will be one digit within the 1-2 range.
Odometer Prompt
• Always prompted for.
• Response will be stored in the odometer field.
• A valid response will be eight digits or less.
Unit # Prompt
• Always prompted for.
• Response will be stored in the manual entry (aux.) field.
• This entry will not be printed on receipts.
• A valid response will be eight digits or less.
Transaction Format
• Track II card data occupies the card and account field.
• Unit number occupies the manual entry field.