Gasboy Voyager Special Card Handler - Manual (Page 16)

Configuration
Page 12 MDE-4410 Gasboy Voyager Special Card Handler Version 001 · June 2005
Required TRFMT Parameters
The first three fields are required and must be setup specifically as described below. For report
purposes if other non-card fields are needed, they can be added after the first three fields.
Page 12 Receipt
if you want the Driver number on a
receipt, set:
Print manual # on receipt: yes Only set this value to “yes” if a driver number is to be printed
on the receipt.
Text used on receipt for manual
number: Driver # Not required if “Print manual # on receipt” (above) is set to
“no.”
Note: Parameters in bold must use the value shown.
Field TRFMT Question Enter Comments
1 Before which field A If no fields exist, enter # which will put the information
at the first field.
Card account 2
Offset in card 0
Field width 8
Auto entry no
Mask entry no
Title Account # This identifies account number which is the first eight
digits of the Club Card number.
2 Before which field B If there is no B, enter #.
Card account 2
Offset in card 8
Field width 5
Auto entry no
Mask entry no
Title Vehicle # Card ID commonly called the Vehicle #.
3 Before which field C If there is no C, enter #.
Card account 2
Offset in card 13
Field width 6
Auto entry no
Mask entry yes
Title Driver # This name is the name that appears on the display
when manual entry is required.
Parameter Name
Value
(Note)
Comments