Gasboy Dorio 10 - Manual

MDE-4611 Dorio 10 Terminal/Okidata® Printer Setup Instructions • October 2006 Page 1
Introduction
Purpose of Document
This document describes the Setup parameters for the Boundless ® Dorio 10 terminal and the
printer switch settings for the Okidata ® Microline ® 184/186 printer when connected to one of
the following Gasboy Fuel Management Systems:
• Series 1000
• Series 900 TopKAT
• CFN
• “A” System
This document is not intended to be a complete reference for the Boundless terminal. The
parameter screens shown are as current as possible; however, interim software changes by
Boundless may result in minor variations. Review the documentation section of the Boundless
website (
http://www.boundless.com ) for any updates and clarifications.
Refer to the appropriate installation manual for the fuel management system being used for
cabling information, etc.
Related Documentation
Gasboy Documentation
Other Documentation
Document
Number
Title GOLD Library
C01665 CFN Series Site Controller II & Islander II Start-Up Manual Gasboy Fuel Management Products
C01918 Gasboy CFN Series Site Controller II Installation Manual Gasboy Fuel Management Products
C08921 Series 1000 Fuel Management System Start-Up Manual Gasboy Fuel Management Products
C35587 CFN Islander I & II Installation Quotation Guide Gasboy Fuel Management Products
C35963 Gasboy CFN Series Islander II Installation Manual Gasboy Fuel Management Products
MDE-4319 TopKAT Fuel Management System Installation Manual Gasboy Fuel Management Products
MDE-4344 Series 1000 Fuel Management System Installation Manual Gasboy Fuel Management Products
Document
Number
Title Where to find
598-0013029 VGB10/VGB11 Video Terminal
Installation and Operating Information http://www.boundless.com/Documentation/598-0013029.pdf
MDE-4611
Dorio 10 Terminal/Okidata ® Printer Setup
Instructions
October 2006