Gasboy 1000 Series Technical Reference Manual - Manual (Page 87)

Cardless Systems
03/07/03 3-21
Sequence Obtaining a receipt is accomplished as follows: After a user fuels his vehicle in
the normal fashion and wants a receipt, he goes back to the Series 1000 and
enters his vehicle number. The system asks if he wants a receipt. If the reply is
yes, a receipt is printed and the transaction is finished.
If he does not choose to get a receipt, the next time he attempts to fuel, the
system checks through the last 16 transactions with quantity. If one of these
matches his vehicle number, the system asks if he wants a receipt (for that
transaction). If the reply is yes, the system prints a receipt. He must then enter a
vehicle number to begin the fueling transaction. If the reply is no, the system
proceeds with a normal fueling operation.
Sample receipt Receipts issued from the Series 1000 contain the following data:
Transaction receipts are not available if:
•
There are no available receipt transactions in the system memory for the
vehicle number.
•
The receipt printer is in an error condition. (i.e., printer jammed, paper out,
printer down).
The system operator can issue a receipt printer command, GR, from the data
terminal to obtain a receipt for a specific transaction number.