Gasboy Tag Reader - Manual (Page 19)

Tag Reader Installation Guide 15
1. Above 18” (0.5 meter) from the island floor
2. At least 18” (0.5 meter) away from the dispenser
Figure 2-2 shows various possible installation locations for the Tag Reader Box.
Figure 2-2. Tag Reader, Outdoor Installation Control Drawing
2-5. 2-5.
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
2-5.1. Preparation
The Tag Reader is fastened by means of four M4 × 16 screws to the mounting surface or flange.
The fastening screws pass through holes in the bottom plate of the Tag Reader. In addition, a 0.474"
hole is required to pass the connection cable. The Tag Reader support flange is provided with holes
suitable for attaching the Tag Reader to it. Figure 2-3 shows the drilling marking template for the
Tag Reader.