1 preliminary note, 1 symbols used, 2 warning signs used – ifm electronic RN7003 User Manual
Page 4: 2 safety instructions, Safety instructions 2
CANopen encoder
4
Preliminary note
1
Symbols used
1.1
►
Instruction
>
Reaction, result
[…]
Designation of pushbuttons, buttons or indications
→
Cross-reference
Important note
Non-compliance can result in malfunctions or interference�
Information
Supplementary note
Warning signs used
1.2
ATTENTION
Warning of damage to property�
Safety instructions
2
This manual is part of the device� It contains information and illustrations about the
correct handling of the device and must be read before installation or use�
Observe the operating instructions�
Non-observance of the instructions, operation which is not in accordance with use
as prescribed below, wrong installation or handling can affect the safety of people
and machinery�
The installation and connection must comply with the applicable national and
international standards� Responsibility lies with the person installing the unit�
Only the signals indicated in the technical data or on the device label may be
supplied to the connections or wires�