Intellinav 3 User Manual

Page 6

Advertising
background image

5

Intellinav 3

Mounting on the Windshield

1.

Clean the surface of the windshield
using rubbing alcohol.

2.

Press the suction cup firmly against
the windshield.

3.

Press down the lever to fix the
suction cup in place.

NOTICE TO DRIVERS IN CALIFORNIA AND
MINNESOTA: State law prohibits drivers in California
(CVC 26708(a)) and Minnesota (169.71, Minnesota
Statutes 2006) from using suction mounts on their
windshields while operating motor vehicles

Mounting on the Dashboard

1.

Remove the adhesive cover on the
disc, and stick the disc on the
dashboard.

2.

Press the suction cup firmly against
the disc.

3.

Press down the lever to fix the
suction cup in place.

Mounting the Cradle and GPS

1. Insert the GPS unit bottom in

first, and then lock it using the
lever on the top.

2.

Adjust the angles of the arms
to achieve the best viewing
position.

Charging the Battery

1.

Prior to first use, please use the AC adapter to fully
charge the unit for 4-6 hours, until battery LED turns
green.

2.

In the vehicle, you may plug in the car charger to
provide continuous power. On a full charge, the unit
can operate between 2 to 3 hours.

3.

To charge the battery, the Battery On/Off switch at
the bottom of the unit must in the On position.

4.

To preserve battery power when the unit will not be
used for an extended period, set the Battery On/Off
switch to the Off position.

Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 7

Advertising