Ivoclar Vivadent EP 600 - Manual (Page 16)

The RS232 interface (14) may also be used to
connect a printer or a PC in order to save or print
firing protocols.
16
Step 6:
Setting-up the cooling grid for
investment rings
The cooling grid for investment
rings is supplied fully assembled.
Please position the grid in a
suitable place.
Please remember that
the investment rings
are very hot and that
the grid should not be
placed on combustible
surfaces or in the
vicinity of combustible
objects and materials.
Step 4:
Mounting the furnace head
connections cover
Once the connections between
the furnace head and the
furnace base are established,
assemble the furnace head
connections cover (54) and
secure it with the corresponding
screws (51).
Step 5:
Establishing additional
connections
Make sure the voltage indicated
on the rating plate of the
apparatus complies with the
local power supply. If everything
is in order, plug the power cord
(21) into the power socket (6).
Vacuum pump
Insert the plug of the vacuum
pump into the socket for the
vacuum pump (7) and slide the
vacuum hose onto the vacuum
hose connection (12).
We recommend using
the Ivoclar Vivadent
VP3 Vacuum Pump
with this furnace.
If another pump is used, the
maximum power consumption
and the maximum final vacuum
of the corresponding pump have
to be observed.
54
12
14
6
21
7
12
79