Ivoclar Vivadent EP 600 - Manual (Page 32)

32
10. Miscellaneous
10.1 Press table
The program parameters are set in the
factory. The parameters used may differ,
but they are based on the latest standard
of technology of the Research &
Development Department of Ivoclar Vivadent,
Schaan.
For each of the listed programs, either the option
"small" or "large" investment ring must be
selected.
The program numbers for the reserve
programs (8–11) are indicated on the
new furnaces which are delivered ex
works as of Software Version V.4.0.
If the Software Version V.4.0 has not been installed
ex works and the furnace has been upgraded with
an update version, the program numbers 6 and 7
will be occupied with standard programs. The
parameters existing in the programs 6 and 7 will
not be maintained.
Program Description Investment ring size
IPS e.max Press large
IPS e.max Press small
IPS e.max ZirPress large
IPS e.max ZirPress small
IPS Empress Esthetic large
IPS Empress Esthetic small
IPS Empress Layering Technique large
IPS Empress Layering Technique small
IPS Empress 2 Layering Technique large
IPS Empress 2 Layering Technique small
IPS Empress Cosmo large
IPS Empress Cosmo small
IPS Empress Staining Technique large
IPS Empress Staining Technique small
Reserve large
Reserve small
Reserve large
Reserve small
Reserve large
Reserve small
Reserve large
Reserve small
1
2
3
4
5
6
7
8
9
10
11