Ivoclar Vivadent IvoBase Injector - Manual (Page 2)

2
List of parts 3
1. Introduction / Signs and Symbols 6
1.1 Preface
1.2 Introduction
1.3 Notes regarding the Operating Instructions
1.4 Note on the different voltage versions
2. Safety First 7
2.1 Indications
2.2 Health and safety instructions
3. Product Description 10
3.1 Components
3.2 Hazardous areas and safety equipment
3.3 Functional description
4. Installation and Initial Start-Up 11
4.1 Unpacking and checking the contents
4.2 Selecting the location
4.3 Removing the transport protection
4.4 Establishing the connections
4.5 Initial start-up
5. Operation and Configuration 14
5.1 Introduction to the operation
5.2 Explanation of key functions
5.3 Basic meaning of the screens
5.4 Settings and information
5.5 Explanation of the symbols on the display
5.6 Description of the beeper sounds
5.7 Operating status display
6. Practical Use 17
6.1 Switching on the injector
6.2 Loading
6.3 Starting the injection process
6.4 Further possibilities and special features of the injector
7. Maintenance, Cleaning and Diagnosis 19
7.1 Monitoring and maintenance
7.2 Emptying the waste water container
7.3 Replacing the heating
7.4 Replacing the temperature sensor
7.5 Cleaning
7.6 Heater test
7.7 Service Hint
7.8 Information about transport protection
8. What if...? 23
8.1 Error messages
8.2 Resin leaks from the flask
8.3 Resin leaks from the injection head
8.4 Technical malfunctions
8.5 Repair
9. Product Specifications 26
9.1 Delivery form
9.2 Technical data
9.3 Acceptable operating conditions
9.4 Acceptable transportation and storage conditions
10. Appendix 27
10.1 Program structure
Table of Contents