Ivoclar Vivadent IvoBase Injector - Manual (Page 7)

7
2. Safety First
This chapter is especially important for individuals who
work with the IvoBase Injector or who have to carry out
maintenance or repair work. This chapter must be read
and the corresponding instructions followed!
2.1 Indications
The IvoBase Injector is solely intended for the processing of special
resins for dental applications. It should be used for this purpose
only. Uses other than the ones stipulated, e.g. injection of other
materials, etc., are contraindicated. The manufacturer does not
assume any liability for damage resulting from misuse. The user is
solely responsible for any risk resulting from failure to observe these
Instructions.
Further instructions to assure proper use of the injector:
– The instructions, regulations and notes in these Operating
Instructions must be observed.
– The instructions, regulations and notes in the material's Instruc-
tions for Use must be observed.
– The injector must be operated under the indicated environmental
and operating conditions (see Chapter 9).
– The IvoBase Injector must be properly maintained.
2.1.1
Risks and dangers
Make sure that no liquids or other
foreign substances enter the
injector during cleaning.
2.1.2
Risks and dangers
The injector may only be carried
by supporting the bottom under
the operating field and by the
recessed grip at the rear of the
injector.
2.1.3
Risks and dangers
Make sure that the flask is
correctly positioned.
The injection program must not
be started if the flask is
incorrectly positioned.
2.1.4
Contraindication
Foreign objects must not be
placed on the injector.