Kawai MP10 - Manual (Page 14)

14
In
tr
oduc
ti
on
2
Front Panel: Jacks & Connectors
HEADPHONE jack
The headphone jack is located at the left end of the key slip and
used to connect a pair of headphones equipped with a standard
1/4” phone jack.
USB TO DEVICE port
The USB to Device port is located at the right end of the key
slip and used to connect a FAT or FAT32 formatted USB memory
device to load and save data.
3
Rear Panel: Jacks & Connectors
a POWER Section
AC IN
Connect the power cable included with the MP10 to this
receptacle.
POWER SWITCH
This switch turns the MP10 ON and OFF.
b FOOT CONTROLLER Section
EXP jack
This jack is used to connect an expression pedal.
FSW jack
This jack is used to connect a momentary foot switch pedal.
DAMPER/SOFT (F-20) jack
This jack is used to connect the F-20 dual-pedal unit included
with the MP10. By default, the right pedal acts as a damper
pedal, while the left pedal functions as a soft pedal.
* Additional functions can be freely assigned to each foot controller in the
Controllers page of the EDIT menu (page 42).
Part Names & Functions
a b c d e