Kawai MP10 - Manual (Page 36)

36
E
D
IT
M
e
nu
EDIT Menu parameters
(PIANO, E.PIANO, SUB)
1
Reverb
1. Type
This parameter selects the reverb type.
* For more information about reverb, please refer to page 20.
* This parameter is common for all three sound sections.
* This parameter is not stored to SOUND but to SETUP only.
2. Pre Delay
This parameter adjusts the delay time before the start of the
reverberation.
* For more information about reverb, please refer to page 20.
* This parameter is common for all three sound sections.
* This parameter is not stored to SOUND but to SETUP only.
3. Time
This parameter adjusts the reverb time.
* For more information about reverb, please refer to page 20.
* This parameter is common for all three sound sections.
* This parameter is not stored to SOUND but to SETUP only.
4. Depth
This parameter adjusts the reverb depth, and is also controlled
by the REVERB DEPTH knob for each sound section.
* For more information about reverb, please refer to page 20.
2
EFX
1. Type
This parameter selects the effect type.
* For more information about effects, please refer to page 21.
* The E.PIANO section lists two pages for EFX1 and EFX2.
* If the EFX for PIANO and SUB sections are both turned ON, the PIANO
section’s setting has higher priority.
2. Parameters
These parameters change depending on the selected EFX type,
and are used to adjust the mixing amount of the effected (wet)
and bypassed (dry) sound, depth, speed, feedback, etc.
* For more information about effects, please refer to page 21.
VALUE : 0 - 101.6ms
VALUE : 0 - 127 VALUE : 300ms - 8.0s
7 TYPES
25 TYPES N / A