Transmitted data, Channel voice message, Channel mode message – Kawai MP10 User Manual
Page 83
83
Ap
p
e
n
d
ix
2
Transmitted Data
1. Channel Voice Message
Note off
Status
2nd Byte
3rd Byte
9nH kkH 00H
n=MIDI channel number
:0H-fH(ch.1 ~ ch.16)
kk=Note Number
:00H - 7fH(0 ~ 127)
Note on
Status
2nd Byte
3rd Byte
9nH kkH vvH
n=MIDI channel number
:0H-fH(ch.1 ~ ch.16)
kk=Note Number
:00H - 7fH(0 ~ 127)
vv=Velocity
:00H - 7fH(0 ~ 127)
Control Change
Status
2nd Byte
3rd Byte
BnH ccH vvH
* Sending by Assignable Control Knobs
Program Change
Status 2nd
Byte
CnH ppH
n=MIDI channel number
:0H-fH(ch.1 ~ ch.16)
pp=Program number
:00H - 7fH(0 ~- 127)
Default = 00H
Pitch Bend Change
Status
2nd Byte
3rd Byte
EnH llH mmH
n=MIDI channel number
:0H-fH(ch.1 ~ ch.16)
mm,ll=Pitch bend value
:00 00-7f 7fH(-8192~0~+8192)
Default = 40 00H
2. Channel Mode Message
Reset All Controller
Status
2nd Byte
3rd Byte
BnH 79H 00H
n = MIDI channel number
:0H-fH(ch.1 ~ ch.16)
*Sending by [PANIC] function
All Note Off
Status
2nd Byte
3rd Byte
BnH 7bH 00H
n = MIDI channel number
:0H-fH(ch.1 ~ ch.16)
*Sending by [PANIC] function
MONO
Status
2nd Byte
3rd Byte
BnH 7eH mmH
n=MIDI channel number
:0H-fH(ch.1 ~ ch.16)
mm=mono number
:01H(M=1)
POLY
Status
2nd Byte
3rd Byte
BnH 7fH 00H
n=MIDI channel number
:0H-fH(ch.1 ~ ch.16)