Ed it m e nu, Split/split point, Key-off noise – Kawai MP10 User Manual
Page 41: Key-off delay, Dynamics, Solo, Transmit
41
E
D
IT
M
e
nu
4. Split/Split Point
This function divides the keyboard into two parts, and allows each of the PIANO, E.PIANO, SUB, and MIDI sections to be assigned
to either the upper or lower part. When Split is set to OFF, the selected section will continue to use the entire keyboard.
The Split Point defines the point at which the upper and lower parts are divided, and is a common parameter for all four sections.
* The Split/Split Point parameters are not stored to SOUND but to SETUP only.
* The Split Point parameter is common for all three sound sections.
* When Split is activated (upper or lower), the selected sound section will be turned ON automatically.
5. Key-off Noise
(E.PIANO)
This parameter adjusts the volume of the noise heard when the
keys of an electromechanical instrument are released.
* This parameter is only available for the E.PIANO section.
6. Key-off Delay
(E.PIANO)
This parameter adjusts the delay time before the Key-off Noise
is heard.
* This parameter is only available for the E.PIANO section.
7. Dynamics
(SUB/MIDI)
This parameter adjusts the keyboard response of the SUB and MIDI sections relative to the PIANO and E.PIANO sections.
When the value is 10 (default), the keyboard response is normal. As the value decreases the keyboard response gradually becomes
less dynamic, and at 0 becomes completely flat (i.e. fixed touch response).
* This parameter is only available for the SUB and MIDI sections.
8. Solo
(MIDI)
This parameter turns the Solo mode ON/OFF and specifies the
playing mode.
When set to ON, playing will be restricted to one note, even
if more than one note is played simultaneously. This can be
used to effectively simulate the performance characteristics of
a monophonic synthesizer.
Solo Mode
Description
Last
Play last note of a group of notes.
High
Play highest note of a group of notes.
Low
Play lowest note of a group of notes.
* This parameter is only available for the MIDI section.
9. Transmit
(MIDI)
This parameter determines whether or not the MP10 sends
note data to external devices.
* This parameter is only available for the MIDI section.
OFF
/
LOWER
/
UPPER
VALUE
: 0 - 127
VALUE
: 0 - 127
VALUE
: 0 (
OFF
) - 10
Lo
u
d
Sof
t
Gentle
Strong
Keyboard Pressure
Sound
V
o
lume
Lo
u
d
Sof
t
Gentle
Strong
Keyboard Pressure
Sound
V
o
lume
Lo
u
d
Sof
t
Gentle
Strong
Keyboard Pressure
Sound
V
o
lume
Dynamics = 10
Dynamics = 5
Dynamics = 0
ON
/
OFF
OFF
/
LAST
/
HI
/
LOW