Kawai MP10 - Manual (Page 23)

section
23
Basic
O
per
a
tion
5
Amp Simulator
(E.PIANO section only)
The tonal character of an amplifier or speaker cabinet is an important component of vintage electric piano sounds. The
MP10’s Amp Simulator function features 6 typical amplifier types, each with drive, level, and 3-band EQ parameters.
„ Turning the Amp Simulator ON/OFF
Press the E.PIANO sound section’s AMP button to turn the amp
simulator ON/OFF.
The LED indicator for the AMP button will turn ON or OFF to
indicate the current status of the amp simulator.
„ Adjusting the Amp Simulator drive
Ensure that the amp simulator is turned ON.
Turn the E.PIANO sound section’s AMP DRIVE knob to adjust the
drive level of the amp simulator.
The AMP DRIVE value will pop-up briefly in the LCD display.
* The AMP DRIVE can be adjusted within the range of 0-127.
„ Changing the Amp type and additional parameters
Ensure that the amp simulator is turned ON.
Press and hold the E.PIANO sound section’s AMP button.
The first Amp Simulator page of the EDIT menu will be shown
in the LCD display.
Turn the control knobs A, B, and C to change the amp type, and
adjust the drive, and level parameters.
Press the CURSOR d button to show the second Amp Simulator
page, then turn the control knobs A, B, and C to adjust the 3-band
AmpEQ parameters.
Press and hold the AMP button again to exit.
„ Amp Simulator parameters
page 1: page 2:
Knob Parameter Description Knob Parameter Description
A AmpType Jazz Combo, Tweed Deluxe, etc. A AmpEQ-Lo The Low freq. level of the amplifier.
B Drive The drive level of the amplifier. B AmpEQ-Mid The Mid freq. level of the amplifier.
C Level The volume level of the amplifier. C AmpEQ-Hi The High freq. level of the amplifier.
* For more detailed information about the Amp Simulator parameters, please refer to page 25.
Amp Sim OFF Amp Sim ON