Kawai MP10 - Manual (Page 56)

section
56
Re
corde
r
5
Loading an SMF file into memory
(cont.)
3. Selecting the keyboard and drum channels
Turn control knobs C and D to specify which channels of the
SMF file should be loaded into the MP10 recorder’s keyboard
and drum tracks.
Press the F3 function button (LISTEN) to audition the current
channel settings.
Press the F4 function button (EXEC) to load the selected SMF file
into the song memory.
4. Starting song playback
Press the F4 function button (PLAY) or f/„ button.
The LED indicator for the f/„ button will turn ON, and the
selected audio file will start to play.
Press __ or `` buttons to fast-forward or rewind the song.
The A and B control knobs can also be used to adjust the volume
and tempo of the song playback.
Press the f/„ button to stop playback, then press the „e button
to reset the playing position of the song to the beginning.
„ A-B Repeat function
The A-B Repeat function allows one section of a song to be repeated
continuously. During song playback:
Press the A  €B button once to set the start point.
The LED indicator for the A  €B button will start to flash.
Press the A  €B button again to set the end point.
The LED indicator for the A  €B button will turn ON and the
specified section will repeat continuously.
To cancel the A-B repeat function, press the A  €B button once
again.
The LED indicator for the A  €B button will turn OFF and normal
playing will resume.
Song Recorder
(Internal Memory)
Fast-Forward Rewind