K-Patents PR-33-AC - Manual (Page 2)

Document/Revision No. Rev. 1.02 Effective: June, 2014
General safety considerations
The process medium may be hot or otherwise hazardous. Use shields and
protective clothing adequate for the process medium - do not rely on avoid-
ance of contact with the process medium.
Precautions when removing a sensor from the process line :
•
Check first that the process line is depressurized and drained.
•
Loosen the flowcell screws cautiously, be prepared to tighten again.
•
Ensure you are clear of any possible spillage and you have a clear emer-
gency escape path.
Warranty
K-Patents is rigorous in ensuring that all products manufactured and supplied by
K-Patents shall be free of defects in material and workmanship. K-Patents agrees
to either replace or repair free of charge any product found to be defective, or parts
thereof when returned to the nearest authorized K-Patents repair facility within two
(2) years of the product’s delivery date.
Important: The warranty is void if the sensor has been taken apart or in any way
tampered with.
Before returning a defective product for service or replacement, please contact K-Patents
or your nearest K-Patents representative (see http://www.kpatents.com/ for contact
information) for packing and shipping information.
Disposal
When wishing to dispose of an obsolete instrument or any parts of an instrument,
please observe local and national regulations and requirements for the disposal of elec-
trical and electronic equipment.