LSC Lighting Redback Operators Manual - Manual (Page 23)

Redback Dimmer Specifications
Operator Manual V1.2
LSC Lighting Systems (Aust) Pty. Ltd Page 21
9 S p e c i f i c a t i o n s
9.1 Mechanical Specifications
Chassis style
2RU Rack mount with
rear outlets 4RU Rack mount or wall
mount with front outlets
Width 482mm 482mm
Height 89mm 178mm Dimensions (mm)
Depth 288mm 251mm
Boxed Weight (kg)
6 channel = 8kg
12 channel = 14kg 6 channel = 9kg
12 channel = 15kg
Construction
Made from aluminium and corrosion resistant steel,
powdercoat finish with rear screened polycarbonate
labels.
9.2 Technical Specifications
Number of Dimmer channels 6 or 12
Channel output rating 10 Amps (at 25°C ambient temp)
Three phase current requirements
(per phase) 20 Amps for 6 channel variants
40 Amps for 12 channel variants
Minimum Resistive Load
(Incandescent) 250 milliamps
(60 Watts at 240 Volts or 27.5 Watts at 110 Volts )
Channel MCB type 1 Pole DIN style Electro-magnetic
Channel MCB breaking capacity 6000 Amps
Dimmer curve selection per channel Yes – 5 selectable curves per channel
Memory storage
6 programmable scenes, 1 riggers scene and 6
predefined chases
Power switching component Triac
Inductor rise time 100µs
Control protocol DMX512 (1990) or DMX512-A (E1-11) with RDM
(E1-20)
Channel output mimic LEDs Yes
DMX Data LEDs Yes
Operational STATUS indicator LED Yes
Number of cooling fans
1 in 6 channel variants
2 in 12 channel variants
Fan cooling control Variable
External software upgradeable Yes – via SD Card slot
50/60Hz frequency Auto-select Yes