Lumens Technology VS-LC101 - Manual (Page 30)

29
7.1.3 Network Setting
1 DHCP: Automatically allocate IPs based on the connected router
2 Manual Configuration: Manually enter network information
7.1.4 Record Setting
1 Basic Settings:
1.1 Audio Delay: Set audio delay time after video is transmitted
1.2 Line out Loop Through: Activate/Deactivate line out loop through. A high-frequency
high-pitched sound is played back if audio from the speaker is picked up by the microphone,
amplified, and retransmitted from the same speaker; in this instance deactivate line out loop
through to prevent feedback
1.3 Drop Record: Adjust recording intervals. If 1 second is selected, a 1-second interval is delayed
before recording begins
1.4 Key note: Key notes can be inserted manually, or automatically on a fixed timer or when
changing PPT index
1.5 Enable PPT Index: Check to enable PPT index software