3 director screen instructions - record setting – Lumens Technology VS-LC101 User Manual
Page 47
46
8.1.3 Director Screen Instructions - Record Setting
1 Video System: NTSC or PAL can be selected
2 Line out Loop Through: Activate/Deactivate line out loop through A high-frequency high-pitched sound
is played back if audio from the speaker is picked up by the microphone, amplified, and retransmitted
from the speaker; in this instance deactivate line out loop through to prevent feedback
3 Audio Delay: Set audio delay time after video is transmitted
4 Drop Record: Adjust recording intervals. If 1 second is selected, a 1-second interval is delayed before
recording begins
5 Recording Mode: Movie mode (single-stream)
6 Storage Encode Profile: Offers 15 encoding formats and user customization
7 Record To: Set local recording storage location
8 Stream Encode Profile: Offers 15 encoding formats and user customization
9 Streaming Mode: Supports RTP multicast and online streaming