Lumens Technology VS-LC101 - Manual (Page 39)

38
7.2.7 Storage Device Setting
Open [Local Storage Setting]
For initial hard disk installation, follow the following installation instructions:
 Format hard drive: Select hard disk and click . A query window will
appear to confirm format. Click “Yes” to begin formatting. After formatting is
complete, close the message box to complete the process.
[Remark] Formatting the hard drive will erase all the information on the hard drive.
Please backup any data on the hard drive before formatting the disk.
[Remark] Format time differs depending on hard disk specification. Do not close the
window while the hard disk is formatting.
 Check [Enable Local Storage]: Checking this item enables files to be
stored to this hard disk once it is mounted.
 Check [Cycling Record]: When the hard drive space is used up, the oldest
data will be automatically overwritten by the newest data, allowing the
system to continue storing information.
 Mounting a Hard Disk: Select [USB1] (according to storage device). Click
[Apply] on the bottom right of the screen to
complete mounting. (Note: This setting must be
done when two or more storage devices are
connected)