Chapter 1 safety instructions – Lumens Technology VS-LC101 User Manual

Page 5

Advertising
background image

4

Chapter 1 Safety Instructions

Please use the product following the safety instructions below:
1 Operation

1.1 Please use the product in the recommended operating environment.
1.2 Do not place the product in tilted position.
1.3 Do not place the product on an unstable trolley, stand or table.
1.4 Do not use this product near water or source of heat.
1.5 Use attachments only as recommended.
1.6 Use the type of power source indicated on this product. If you are not sure of the

type of power available, consult your dealer or local electricity company for advice.

1.7 Always take the following precautions when handling the plug. Failure to do so may

result in sparks or fire:

 Ensure the plug is free of dust before inserting it into a socket.
 Ensure that the plug is inserted into the socket securely.

1.8 Do not overload wall sockets, extension cords or multi-way plug boards to avoid

potential risks.

1.9 Do not block slots and openings in the case of this product as poor ventilation may

lead to overheating of this product.

1.10 Except as specifically instructed in this User Manual, do not attempt to open or

remove covers by yourself. It may expose you to electric shock or other hazards.
Refer all servicing to licensed service personnel.

1.11 Unplug this product from the outlet and refer servicing to licensed service personnel

when the following situations happen:

 If the power cords are damaged or frayed.
 If liquid is spilled into the Product or the Product has been exposed to rain or water.

2 Storage

2.1 Do not place the Product where the cord can be stepped on as this may result in

fraying or damage to the lead or the plug.

2.2 Never push objects of any kind through cabinet slots. Never allow liquid of any kind

to spill into the Product.

2.3 Unplug this product during thunderstorms or if it is not going to be used for an

extended period.

2.4 Do not place this product or accessories on top of vibrating equipment or heated

objects.

3 Cleaning

3.1 Unplug all the cables before cleaning. Use a damp cloth for cleaning. Do not use

liquid or aerosol cleaners.

4 Remote control (if the accessories are equipped with remote control)

4.1 Using an incorrect battery type in the remote control may result in breakdown.

Follow local instructions on how to dispose of used batteries.

Advertising