Marantz NR1501 - Manual (Page 11)

NAMES AND FUNCTIONS
7
BASIC
CONNECTIONS
BASIC
OPERA
TION
ADV
ANCED
CONNECTIONS
SETUP
ADV
ANCED
OPERA
TION
TROUBLESHOOTING
OTHERS
NAMES AND FUNCTIONS
ENGLISH
¤4 TOP button
Pressing this button during setup returns you to the
top screen of the setup main menu.
¤5 DISPLAY button
This button is used to selects the display mode for
the front display of the unit.
¤6 INPUT 3 button
This button is for forward-feeding the input source
to select a desired source.
INPUT 4 button
This button is for backward-feeding the input source
to select a desired source.
¤7 SETUP button
This button is used to setup for DVD and other
device.
¤8 SOURCE button
These buttons are used to switch the source of your
A/V Receiver. Each time a source button is pressed,
the remote controller changes to the source which
was pressed.
This remote controller can control 10 types of
equipment. To change the A/V Receiver source,
press this button twice within two seconds. The
signal is sent when it is pressed the second time.
Notes
• Press the AMP button to operate the unit's
amplifi er functions.
• Press the TUNE button to operate the unit's tuner
functions.
¤9 STEREO button
This button is used to select STEREO mode.
‹0 AUTO button
This button is used to select auto surround.
‹1 NIGHT button
Pressing this button prevents the Dolby Digital
signal from playback at a loud voice.
‹2 SLEEP button
This button is used for setting the sleep timer.
‹3 I / SOURCE ON/OFF button
This button is used to turn a specifi c source (such
as a DVD player) on or off independently from the
rest of the system.
‹4 SET button
This button is used to enter preset mode.
‹5 SET indicator
Indicates when the preset codes of the remote
controller are operated.
‹6 SEND indicator
Indicates when the remote controller is transmitting
a signal.
‹7 Infrared Transmitter
This transmitter emits infrared light. Press the
buttons while pointing the transmitter towards the
infrared receiver window of the unit or other AV
equipment.
NAMES AND FUNCTIONS