Microcom 814M Programming Manual User Manual
Page 16
12
ESC ! n
[Name]
[Format]
[Range]
[Description]
[Notes]
[Default]
[Reference]
Select print mode
ASCII
ESC
! n
Hex
1B
21
n
Decimal
27
33
n
0 ≤ n ≤ 255
Selects print mode(s) with n as follows:
Bit 1/0
Hex Decimal
Function
0
00
0
Standard ASCII characters
0
1
01
1
Compressed ASCII characters
1,2
Undefined.
0
00
0
Emphasized mode not selected
3
1
08
8
Emphasized mode selected
0
00
0
Double-height mode not selected
4
1 10
16 Double-height
mode
selected
0
00
0
Double-width mode not selected
5
1 20
32 Double-width
mode
selected
6
Undefined
0
00
0
Underline mode not selected
7
1
80
128
Underline mode selected
When both double-height and double-width modes are selected, quadruple size
characters are printed.
The printer can underline all characters, but cannot underline the space set by HT or
90° clockwise-rotated characters.
The thickness of the underline is that selected by ESC -.
When some characters in a line are double or more height, all the characters on the
line are aligned at the baseline.
ESC E can also turn on or off emphasized mode. However, the last received
command is effective.
ESC - can also turn on or off underline mode. However, the setting of the last received
command is effective.
GS ! can also select character size. However, the last received command is effective.
n = 0
ESC -, ESC E, GS !