Microcom 814M Programming Manual - Manual (Page 61)

57
[Reference]
ESC $, ESC T, ESC W, ESC \, GS $, GS P
GS ^ r t m
[Name]
[Format]
[Range]
[Description]
[Notes]
[Reference]
Execute macro
ASCII GS ^ r t m
Hex 1D 5E r t m
Decimal 29 94 r t m
0 ≤ r ≤ 255
0 ≤ t ≤ 255
m = 0, 1
Executes a macro.
♦ r specifies the number of times to execute the macro.
♦ t specifies the waiting time for executing the macro.
♦ m specifies macro executing mode.
When m = 0:
The macro executes r times continuously at the interval specified by t (t x 250
ms).
When m = 1:
After waiting for the period specified by t, the PAPER OUT LED indicators blink
and the printer waits for the FEED button to be pressed. After the button is
pressed, the printer executes the macro once. The printer repeats the operation
r times.
ƒ The waiting time is t × 250 ms for every macro execution.
ƒ If this command is received while a macro is being defined, the macro definition is
aborted and the definition is cleared.
ƒ If the macro is not defined or if r is 0, the command is disabled.
ƒ When the macro is executed (m = 1), paper always cannot be fed by using the FEED
button.
GS :
GS a n
[Name]
[Format]
[Range]
[Description]
Enable / Disable Automatic Status Back (ASB)
ASCII GS a n
Hex 1D 61 n
Decimal 29 097 n
0 ≤ n ≤ 255
Enables or disables Automatic Status Back function.