Microcom 814M Programming Manual - Manual (Page 42)

38
FS p n m
[Name]
[Format]
[Range]
[Description]
[Notes]
[Reference]
Print NV bit image
ASCII FS p n m
Hex 1C 70 n m
Decimal 28 112 n m
1 ≤ n ≤ 255
0 ≤ m ≤ 3 , 48 ≤ m ≤51
Prints a NV bit image n using the mode specified by m.
203DPI:
m Mode
Vertical Dot Density
(DPI)
Horizontal Dot
Density (DPI)
0.48 Normal 203 203
1.49 Double-width 203 101
2.50 Double-height 101 203
3.51 Quadruple 101 101
300DPI:
m Mode
Vertical Dot Density
(DPI)
Horizontal Dot
Density (DPI)
0.48 Normal 300 300
1.49 Double-width 300 150
2.50 Double-height 150 300
3.51 Quadruple 150 150
♦ n is the number of the NV bit image (defined using the FS q command).
♦ m specifies the bit image mode.
ƒ
NV bit image means a bit image which is defined in a non-volatile memory by FS q and
printed by FS p.
ƒ This command is not effective when the specified NV bit image has not been defined.
ƒ This command is not affected by print modes (emphasized, double-strike, underline,
character size, white/black reverse printing, or 90° rotated characters, etc.), except
upside-down printing mode.
ƒ If the downloaded bit-image to be printed exceeds one line, the excess data is not
printed.
ESC *, FS q, GS /, GS v 0