NavCom StarFire over IP - Manual (Page 2)

Applications Note – StarFire Over IP Setup
Rev. A December, 2012
Software Requirements
FieldGenius 6.0.3.5
Cellular service that includes a data plan. Make sure that cellular service is enabled with a
user name and password.
Sapphire Firmware v3.2.11.0
SFOIP Software Option Enabled
Valid SF License
Procedure
1. Click the FieldGenius icon on the handheld screen.
2. Create a new Project OR select the name of an existing project.
3. Access the Instrument selection screen
4. Click the GPS Rover button.
5. Make sure that SF-3040 appears in the
profile field.
6. Click Connect.
7. Access the Link Configure screen
8. In the Link Device field, select None from
the pulldown list.
9. Click Continue.