NavCom StarFire over IP User Manual
Page 3
Advertising
Applications Note – StarFire Over IP Setup
Rev. A
December, 2012
10. Access the Map Screen.
11. Click the Tools icon on the far right of the
screen.
12. Access the Instrument Settings screen.
13. Click the StarFire Setup button..
14. Allow StarFire Setup to complete the
configuration and dial out to the internet.
15. Access the StarFire Setup screen
16. In the Source field, select StarFire Over IP
from the pulldown list. Note that “StarFire”
is selected as the default.
17. In the StarFire Over IP section, determine
that the Primary Caster and Backup Caster
fields show “Available.”
Note: Casters are hardcoded and cannot
be changed.
Advertising