NavCom StarFire over IP User Manual
Page 5
Advertising
Applications Note – StarFire Over IP Setup
Rev. A
December, 2012
User Tips
For FieldGenius, StarFire Over IP is connected via phone modem. This can only
be accomplished if the handheld device is disconnected from the PC.
The handheld unit accesses the GNSS receiver by means of a Bluetooth
connection.
Connection to cellular service must be made prior to StarFire Over IP setup. The
Phone option must be set to ON.
The handheld unit can access the StarFire Over IP feature via WIFI as well as
via the cellular phone connection.
Advertising