NavCom SF-2050 Rev.D - Manual (Page 23)

SF-2050 User Guide - Rev. D
„
Base LEDs
Table 4: Base station Indication
BASE Status
The BASE LEDs are not utilized in the
SF-2050 GPS sensor
‡‡
The GPS LEDs will blink at the PVT positioning rate
selected (1, 2, 5, 10 and 25 Hz).
„ GPS LED s
Table 5: GPS Light Indication
GPS Status
Power is off
Power is on, No satellites tracked
Tracking satellites, position not available yet
Non-differential positioning
Code based differential positioning
Dual frequency Phase positioning
2-21