NavCom SF-2050 Rev.D - Manual (Page 38)

SF-2050 User Guide - Rev. D
Other manufacturer’s equipment must be used in
accordance with the safety instructions issued by that
manufacturer. This includes other manufacturers
equipment that may be attached to NavCom
Technology, Inc. manufactured equipment.
The equipment should always be used in accordance
with local regulatory practices for safety and health at
work.
There are no user serviceable parts inside the SF-2050
GPS sensor. Accessing the inside of the equipment will
void the equipment warranty.
Care should be taken to ensure that the SF-2050 does
not come into contact with electrical power
installations, the unit is securely fastened and there is
protection against electromagnetic discharge in
accordance with local regulations.
The GPS sensor has been tested in accordance with FCC
regulations for electromagnetic interference. This does
not guarantee non-interference with other equipment.
Additionally, the
GPS sensor may be adversely affected
by nearby sources of electromagnetic radiation.
The Global Positioning System is under the control of
the United States Air Force. Operation of the GPS
satellites may be changed at any time and without
warning.
5-36