Nortec ME Direct Feed Installation - Manual (Page 22)

22 Installation
9. Mount the droplet separator cassettes (this step must only be carried out, if your system is
equipped with a droplet separator):
Note: to avoid damage to the droplet seperator cassettes during transit, we recommend that the
droplet seperator cassettes are fitted on site.
• Starting with the tallest droplet separator cassettes on the bottom, riveting the banks of the
droplet separator cassettes together using ø 3.2 mm (0.13") blind rivets. Make sure the overlying
cassettes slip properly into the subjacent cassettes.
Fig. 12: Riveting the banks of the droplet separator cassettes together