Nortec ME Direct Feed Installation - Manual (Page 32)

32 Installation
4.5.2 Mounting the optional control unit
Fig. 19: Mounting the optional control unit
Mounting procedure:
1. Mark the attachment points for the wall support at the desired position with the help of a level.
2. Fix the wall supports to the wall using appropriate fixings. Before tightening the fixings adjust the
wall supports horizontally using a level.
3. Hang up the control unit onto the wall support and secure using the two M6 bolts in the top corners
of the control unit.
170
(6.7")
64.5 (2.5
")
270
(10.6")
50
50
(2.0")
(2.0")
350 (13.8
")