Nortec ME Direct Feed Installation - Manual (Page 24)

24 Installation
4.3 Mounting the Hydraulic manifold
The mounting procedure of the Hydraulic manifold depends on whether or not the Hydraulic manifold is
mounted internal or external to the duct.
4.3.1 Mounting the Hydraulic manifold (internal installation)
1. Fix the Hydraulic manifold via the prefixed support to tank using the bracket, nuts (M8, AF: 13 mm)
and washers supplied.
2. Align the Hydraulic manifold to the middle of the tank, then tighten the nuts.
Fig. 14: Mounting the Hydraulic manifold of ME Direct Feed (internal installation)