Onwa Marine Electronics KR-1338C v.1 - Manual (Page 44)

3.12 Suppressing Noise
Electrical noise can be suppressed by turning on " 8.NOISE REJ " on the OTHERS
menu.
3.13 Adjusting Brilliance of Markers
"
2. Mark brill " on the OTHER menu adjusts the brilliance of markers such as
the cursor.
3.14 Outputting Target Position
Target position data can be output to the navaid in IEC 1162 format. Press and
hold down the [TLL] key to output the data. This function requires position data
and heading signal.
36