OpenEye OE2-E120 - Manual (Page 31)

27717AP 31
RECORD
RECORD SETUP
Use RECORD SETUP to configure the recording schedule and frame capture rate. In SCHEDULE SETUP, users can define the
recording schedules:
• DAY
• NIGHT
• WEEKEND
Frame Setup
Configure the PPS for each schedule – Day > Night >
Weekend.
1. Select the recording schedule time (DAY, NIGHT,
WEEKEND).
2. Set the SIZE/Resolution (352 × 240, 704 × 240,
704 × 480).
3. Set the RECORDING MODE (C / M / C+M / N/A).
4. Set the PPS for Continuous and Motion/Event
recording (1~30).
5. Set the recording image QUALITY (Low, Normal, Fine,
S. Fine).
6. Set the POST ALARM time (5~100 sec - the amount of
time the DVR records after a motion/event alarm).
Schedule Setup
NIGHT – Set nighttime (ex. If 18:00 to 6:00 is defined as
nighttime, 6:00 to 18:00 is defined as daytime).
WEEKEND – Define weekend.
FRAME AUDIO INSTANT SCHEDULE
RECORD SETUP - SCHEDULE
SAVE CANCEL
FROM
00:00:00
N/A
TO
00:00:00
N/A
NIGHT
WEEKEND
N OTE : This DVR is set to record 24 hours
a d ay / 7 d ays a week by default . To specify
a different frame rate and/or resolution for
nighttime or wee kend s, adjust the NIGHT and
WEEKEND schedule option s.