OpenEye OE2-E120 - Manual (Page 46)

46
BACKUP
MANUAL BACKUP
Back up recorded data on a CD-RW, DVD-RW or connected USB device.
Tip
Refer to the list of Approved USB Flash Drives in the Introduction chapter.
1. Press BACKUP on the front panel or remote control
and log in.
2. Insert media.
3. Select TARGET media.
Caution If you are using a new USB device to back up your
data, you must format it first as FAT32.
4. Set FROM and TO date and time.
5. Select CHANNELS to include in backup.
6. Select ESTIMATE to display estimated data size and
free space available.
Note ESTIMATE must be selected before selecting the WRITE function. If any backup parameters are changed (Date,
Time, Channels) you must select ESTIMATE again.
7. Select WRITE to start backup.
Caution Do not shutdown the system during the backup process.
AUTO BACKUP
Create a mirrored backup of recorded data on a connected USB external hard drive.
Caution OpenEye recommends the use of hard drives only; the use of flash drives is not recommended for auto backup.
1. Press BACKUP on the front panel or remote control
and log in.
2. Select TYPE and press ENT to select AUTO BACKUP.
3. Connect a USB drive to the DVR.
4. Select USB TARGET.
5. Set OVERWRITE ON if you want to write over previous
data on the USB device.
6. Enter a TITLE for the backup file.
7. Select CHANNELS to include in backup.
8. Select START to start backup.
Caution Do not shutdown the system during the backup process.
BACKUP
TYPE
TARGET
FROM
TO
CHANNEL
RECORDING START TIME
2007/07/05 10:00:00
RECORDING END TIME
2007/07/17 09:59:59
REQUIRED SPACE
FREE SPACE
EXIT
MANUAL BACKUP
USB USB FORMAT
07/05/2007 12:55:47
07/17/2007 13:30:03
ALL
0.00MB
NONE
ESTIMATE WRITE HELP
BACKUP
TYPE AUTO BACKUP
USB TARGET
OPTION
TITLE
CHANNEL
FREE SPACE
STATUS
EXIT
NONE
OVERWRITE OFF
dvr
ALL
NONE
NOT RUNNING. . .
START STOP