OpenEye OE2-E120 - Manual (Page 54)

54
ACCESS REMOTE E-SERIES DVR
1. Open the Remote Software.
2. Click the icon of the server as defined previously.
3. Enter the user name and password of an authorized remote user as defined in the Network > Client Setup > User
Menu on the E120 system.
Note User Name and Password are both case sensitive.
4. Click Connect.
CONNECTING TO MULTIPLE DVRS
Connect up to 4 E-Series DVRs using the Remote Software and easily switch between DVRs.
1. Configure all DVR connections as described above in Configuring a Remote PC.
2. After connecting to the first DVR, click CONNECT on the Display screen to open the Local Setup window.
3. Select a second pre-configured DVR and click Connect.
4. Use the drop-down menu in the lower left corner of the display screen to switch between the connected DVRs.
USING THE REMOTE SOFTWARE
SETTING THE TIME AND DATE
1. Exit to Windows by clicking EXIT on the Main Display Screen and selecting Restart in Windows Mode.
2. Open Windows Explorer. Do this by right-clicking on the My Computer Icon (located on the top left hand corner of the
Desktop) and select Explore.
3. Click Control Panel to open it. If you do not see Control Panel listed, Click My Computer to expand the folder tree.
4. Double Click on Date and Time inside Control Panel.
5. Adjust the Date and Time.
6. When finished, close all open windows and restart the PC. Do this by clicking the Start button (located on the lower
left hand side of the Desktop) and selecting Shut Down.