OpenEye OE2-E120 - Manual (Page 32)

32
Audio Setup
Specify volume level and enable Audio for recording according to preset schedules (DAY, NIGHT, WEEKEND) and Live or
Search mode. When you select the AUTO setting for Live and Search mode, the DVR will automatically play the audio channel
mapped to the video channel you are viewing.
Enabling Audio for Recording and Live Video
Tip If Audio is set to OFF for Live mode, it will not be available for remote monitoring.
1. Select the desired Audio channel (1~4CH, ALL, OFF) to enable for each schedule mode (DAY, NIGHT, WEEKEND).
2. Select the desired Audio channel (1~4CH, AUTO, OFF) to enable for Live and Search modes.
3. Set the audio Volume (1~14).
Mapping Audio to Video
Map the Audio channels to the Video channels. The selected Audio channel will be recorded with the associated video.
1. Associate AUDIO 1CH with the desired VIDEO channel (1~4).
2. Repeat for AUDIO channels 2~4.